Installation, Storage, and Compute with Windows Server 2016: 70-740 exam. Share the latest 70-740 dumps and Practice test questions for free. Real and effective exam questions and answers. 70-740 pdf online Download.
Examthings share 40 Practice test questions for FREE! Get the full 70-740 exam dumps: https://www.leads4pass.com/70-740.html (Total questions:291 Q&A)
[PDF] Free Microsoft MCSA 70-740 pdf dumps download from Google Drive: https://drive.google.com/open?id=1arUK9hrLmbZkxEYME2usof649Rxndlfo
[PDF] Free Full Microsoft pdf dumps download from Google Drive: https://drive.google.com/open?id=1AwBFPqkvdpJBfxdZ3nGjtkHQZYdBsRVz
Exam 70-740: Installation, Storage, and Compute with Windows Server 2016: https://www.microsoft.com/en-us/learning/exam-70-740.aspx
Latest effective Microsoft MCSA 70-740 Exam Practice Tests
QUESTION 1
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while
others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
You have a server named Server l that runs Windows Server 2016.
You plan to use Windows Server Backup to back up all of the data on Server l. You create a new volume on Server 1.
You need to ensure that the new volume can be used as a backup target. The backup target must support incremental
backups.
Solution: You mount the volume to C:\backup. and you format the volume by using FAT32.
Docs this meet the goal?
A. Yes
B. No
Correct Answer: B
QUESTION 2
You have a Hyper-V failover cluster that contains three nodes. Virtual machines are distributed evenly across the cluster
nodes.
You need to ensure that if a node loses connectivity from the other nodes, the virtual machines on the node will be
transitioned to one of the remaining nodes after one minute.
Which settings should you modify?
A. QuarantineDuration and QuarantineThreshold
B. SameSubnetDelay and CrossSubnetDelay
C. QuorumArbitrationTimeMax and RequestReplyTimeout
D. ResiliencyPeriod and ResiliencyLevel
Correct Answer: C
References: https://msdn.microsoft.com/en-us/library/aa369123(v=vs.85).aspx https://msdn.microsoft.com/en-
us/library/bb394696(v=vs.85).aspx
QUESTION 3
You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 has ab external virtual switch named
Switch1. Server1 hosts a virtual machine named VM1 that runs Windows Server 2016. VM1 has one network adapter.
The network adapter connects to Switch1.
You need to limit the maximum network bandwidth available to VM1 to 100 Mbps. The solution must limit the bandwidth
for VM1 only.
Which cmdlet should you run?
A. Set-NetAdapter
B. Set-VMNetworkAdapter
C. Set-VM
D. Set-NetAdapterVmq
E. Set-NetworkSwitchPortProperty
Correct Answer: B
The Set-VMNetworkAdapterVlan cmdlet configures virtual LAN settings for the traffic through a virtual network adapter.
QUESTION 4
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while
others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
You have a Hyper-V host named Server1 that hosts a virtual machine named VM1. Server1 and VM1 run Windows
Server 2016.
The settings for VM1 are configured as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that you can use the Copy-VMFile cmdlet on Server1 to copy files from VM1.
Solution: You enable the Guest services integration service for VM1.
Does this meet the goal?
A. Yes
B. No
Correct Answer: A
References: https://technet.microsoft.com/en-us/library/dn798297(v=ws.11).aspx
QUESTION 5
You have a file server named Server1 that runs Windows Server 2016.
Object access auditing is configured on Server1.
You need to filter the Security event log to show all log entries that relate to a user named User1.
What should you do?
A. Right-click the Security log, and then click Filter Current Log… On the Filter tab, type a value in the User box.
B. Right-click the Security log, and then click Filter Current Log… On the Filter tab, select a value from the Event
sources box.
C. Right-click the Security log, and then click Create Custom View… On the Filter tab, type a value in the User box.
D. Right-click the Security log, and then click Filter Current Log… On the XML tab, modify the QueryList entry and set an
EventData tag.
Correct Answer: A
Right clicking the event log name and selecting the “Filter Current Log” will display various options for filtering the event
log.
QUESTION 6
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is
repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is
exactly the same in each question in this series.
Start of repeated scenario Your network contains an Active Directory domain named contoso.com. The functional level
of the forest and the domain is Windows Server 2008 R2. All servers in the domain run Windows Server 2016 Standard.
The domain contains 300 client computers that run either Windows 8.1 or Windows 10.
The domain contains nine servers that are configured as shown in the following table.
The virtual machines are configured as follows:
Each virtual machine has one virtual network adapter.
VM1 and VM2 are part of a Network Load Balancing (NLB) cluster.
All of the servers on the network can communicate with all of the virtual machines.
End of repeated scenario.
You create a new NLB cluster that contains VM3.
You need to ensure that VM2 can remain in the original cluster and be added to the new cluster.
What should you do first?
A. Add a new virtual network adapter to VM2.
B. Install the Web Application Proxy server role on VM2 and VM3.
C. Modify the default port rule.
D. Change the cluster operation mode.
Correct Answer: A
QUESTION 7
You deploy two servers that run Windows Server 2016.
You install the Failover Clustering feature on both servers.
You need to create a workgroup cluster.
What should you do?
A. Configure both of the server to be in a workgroup named Workgroup. Configure the Cluster Service to log on as
Network Service. Run the New-Cluster cmdlet and specify an administrative access point of None .
B. Create matching local administrative accounts on both of the servers. Assign the same primary DNS suffix to both of
the servers. Run the New-Cluster cmdlet and specify an administrative access point of DNS .
C. Configure both of the server to be in a workgroup named Workgroup. Configure the Cluster Service to log on as
Network Service. Run the New-Cluster cmdlet and specify an administrative access point of DNS.
D. Create matching local administrative accounts on both of the servers. Assign the same primary DNS suffix to both of
the servers. Run the New-Cluster cmdlet and specify an administrative access point of None
Correct Answer: B
References: https://rlevchenko.com/2015/09/07/workgroup-and-multi-domain-clusters-in-windows-server-2016/
QUESTION 8
Your network contains an Active Directory forest The forest contains two domain controllers named DC1 and DC2 that
run Windows Server 2016. DC1 holds all of the operations master roles.
DC1 experiences a hardware failure.
You plan to use an automated process that will create 1000 user accounts.
You need to ensure that the automated process can complete successfully.
Which command should you run? To answer, select the appropriate options in the answer area.
Hot Area:
QUESTION 9
You have a server named Server1 that runs Windows Server 2016.
On Server1, you use the Basic template to create a new Data Collector Set named CollectorSet1.
You need to configure CollectorSet1 to generate performance alerts.
What should you do before you start CollectorSet1?
A. Modify the performance counter data collector of CollectorSet1.
B. Add a new data collector to CollectorSet1.
C. Modify the configuration data collector of CollectorSet1.
D. Add a new task to CollectorSet1.
Correct Answer: A
https://technet.microsoft.com/en-us/library/cc722414(v=ws.11).aspx
QUESTION 10
You have a Hyper-V host named Serverl that runs Windows Server 2016 Datacenter. Serverl is activated.
On Server 1. you deploy a virtual machine named VM1 that has a Server Core installahon of Windows Server 2016
Standard.
You need to activate VMI try using Automatic Virtual Machine- Activation (AVMA).
Which command should you run? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
QUESTION 11
You have just finished installing Windows Server 2016 on a new server.
Your colleague has informed you that its essential that you must activate Windows Server.
Which of the following command line tools can be used to Activate Windows Server?
A. Netdom C:\windows\system32\slmgr.vbs -ato
B. Netsh C:\windows\system32\slmgr.vbs -ato
C. Ocsetup C:\windows\system32\slmgr.vbs -ato
D. Cscript C:\windows\system32\slmgr.vbs -ato
Correct Answer: D
The correct answer is Cscript C:\windows\system32\slmgr.vbs -ato
QUESTION 12
Your network contains an Active Directory forest named contoso com The forest contains a member server named
Server1 that runs Windows Server 2016 Server1 is located in the perimeter network You install the Active Directory
Federation Services server role on Server1. You create an Active Directory Federation Services (ADFS) farm by using a
certificate that has a subject name of sts.contoso com You need to enable certificate authentication from the Internet on
Server1 Which two inbound TCP ports should you open on the firewall? Each correct answer presents part of the
solution
A. 389
B. 443
C. 3389
D. 8531
E. 49443
Correct Answer: BE
QUESTION 13
In this section, you\\’ll see one or more sets of questions with the same scenario and problem Each question presents a
unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the
solutions
might solve the problem. It is also possible that none of the solutions solve the problem.
Once you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen Note: This question is part of a series of questions that present the same scenario. Each
question
in the series contains a unique solution. Determine whether the solution meets the stated goals.
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named
Server1. All client computers run Windows 10.
On Server1, you have the following zone configuration
You need to prevent Server1 from resolving queries from DNS clients located on Subnet4 Server1 must resolve queries
from all other DNS clients Solution From a Group Policy object (GPO) in tne domain, you modify the Network List
Manager Policies Does this meet the goal?
A. Yes
B. No
Correct Answer: B
QUESTION 14
When you create a new SET team, you must configure the following team properties: Member adapters and Load
balancing mode.
Which Load balancing mode ensures that outbound loads are distributed based on a hash of the TCP Ports and IP
addresses.
This mode also re-balances loads in real time so that a given outbound flow can move back and forth between SET
team members.
A. Dynamic
B. Hyper-V Port
Correct Answer: A
QUESTION 15
You are deploying DirectAccess to a server named DA1. Da1 will be located behind a firewall and will have a single
network adapter The intermediary network will be IPv4.
You need to configure firewall to support DirectAccess.
Which firewall rules should you create for each type of traffic? To answer, drag the appropriate ports and protocols to
the correct traffic types. Each port and protocol may be used once, more than once, or not at all. You may need to drag
the
split bar between panes or scroll to view content.
Select and Place:
QUESTION 16
You have Nano Server image named Diskl.vhdx.
You mount Diskl.vhdx.
You need to add a folder that contains several files to the image.
Which tool or cmdlet you should use?
A. File Explore.
B. Add-Windows Image
C. Nano Server Image Builder
D. Dism
Correct Answer: D
QUESTION 17
You have an Active Director domain named Contoso.com. The domain contains servers named Server 1, Server2 and
Server3 that run Windows Server 2016
Server1 and Server2 are nodes in a Hyper V cluster named Cluster1. You add a Hyper V Replica Broker role named
Broker 1 to Cluster 1 Server3 is a Hyper-V server. A virtual machine named VM1 runs on Server3.
Live Migration is enabled on all three servers and it is configured to use Kerberos authentication only.
You need to ensure that you can perform the migration of VM1 to Server2
What should you do?
A. Modify the Storage Migration settings on Server3
B. Modify the Cluster Permissions for Cluster1.
C. Add the Server3 computer account to the Replicator group on Server1 and Server2.
D. Modify the Delegation settings for the Server3 computer account.
Correct Answer: D
References: https://technet.microsoft.com/en-us/library/jj134199(v=ws.11).aspx#BKMK_Step1
QUESTION 18
You have a server named Server 1 that runs Windows Server 2016 and has the Hyper-V server role installed.
On Server1, you plan to create a virtual machine named VM1.
You need to ensure that you can start VM1 from the network.
What are two possible ways to achieve the goal? Each correct answer presents a complete solution.
A. Create a generation 2 virtual machine.
B. Create a generation 1 virtual machine and run theEnable-NetAdapterPackageDirectcmdlet.
C. Create a generation 1 virtual machine that has a legacy network adapter.
D. Create a generation 1 virtual machine and configure a single root I/O virtualization (SRV-IO) interface for the network
adapter.
Correct Answer: AC
QUESTION 19
NOTE: This Question is a part of a series of questions that use the same or similar answer choices. An answer choice
may be correct for more than one question in the series Each question is independent of the other questions in this
series.
Information and details provided in a question apply only to that question.
You have a Hyper host named server 1 that runs Windows Server 2016 and a two-node scale-out file server cluster
named Cluster1.
You need to migrate the storage on VM1 to Cluster1.
Which tool should you use?
A. the clussvc.exe command
B. the Cluster.exe command
C. the Computer Management snap-in
D. the configure hyperv.exe command
E. the Disk Management snap-in
F. the Failover Cluster Manager snap-in
G. the Hyper-V Manager snap-in
H. the Server Manger app
Correct Answer: G
QUESTION 20
You are preparing an image of Windows Server 2016.
The image is missing the driver foe a network adapter that is required in your environment.
You need to ensure that the image contains the network adapter driver.
Which three cmdlets should you use in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to
the? answer area and arrange them m the correct order.
Select and Place:
QUESTION 21
On a new server, you install Windows Server 2016 and then you install the Hyper-V server role.
You need to ensure that you can deploy Windows containers that use an image of the Server Core installation of
Windows Server.
Which four commands should you use in sequence? To answer, move the appropriate commands from the list of
commands to the answer area and arrange them in the correct order.
Select and Place:
QUESTION 22
Your network contains an Active Directory domain named contoso com The domain contains two servers named
Server1 and Server2 that run Windows Server 2016.
Server1 has IP Address Management (IPAM) installed Server2 has Microsoft System Center 2016 Virtual Machine
Manager (VMM) installed.
You need to integrate IPAM and VMM.
Which types of objects should you create on each server? To answer, drag the appropriate object types to the correct
servers Each object type may be used once, more than once, or not at all You may need to drag the split bar between
panes or scroll to view content.
Select and Place:
QUESTION 23
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while
others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
You have an Exchange Server 2016 organization.
Some users access the mailbox on their mobile device by using Exchange ActiveSync.
You need to prevent the users from synchronizing more than one month of email or calendar data to their device.
Solution: You deploy an Allow/Block/Quarantine policy.
Does this meet the goal?
A. Yes
B. No
Correct Answer: B
QUESTION 24
In this section, you\\’ll see one or more sets of questions with the same scenario and problem Each question presents a
unique solution to the problem, and you must determine whether the solution meets the stated goals Any of the
solutions might solve the problem. It is also possible that none of the solutions solve the problem. Once you answer a
question in this section, you will NOT be able to return to it As a result. these questions will not appear in the review
screen Note This question is part of a series of questions that present the same scenario Each question in the series
contains a unique solution Determine whether the solution meets the stated goals. Your network contains an Active
Directory forest named contoso.com. The forest contains a member server named Server1 that runs Windows Server
2016 All domain controllers run Windows Server 2012 R2 Contoso com has the following configuration
You plan to deploy an Active Directory Federation Services (AD FS) farm on Served and to configure device registration
You need to configure Active Directory to support the planned deployment. Solution You upgrade a domain controller to
Windows Server 2016 Does this meet the goal?
A. Yes
B. No
Correct Answer: B
QUESTION 25
Your network contains an Active Directory domain named contoso.com. The domain contains four servers named
Server1. Server2. Server3. and Server4 that run Windows Server 2016.
Server1 has IP Address Management (IPAM) installed Server2, Server3, and Server4 have the DHCP Server rote
instated IPAM manages Server2. Server3, and Server4.
A domain user named User1 is a member of the groups shown in the following table.
QUESTION 26
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while
others might not have a correct solution.
After you answer a question in this section, yon will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
You have two servers that run Windows Server 2016.
You plan to create a Network Load Balancing (NLB) cluster that will contain both servers.
You need to configure the network cards on the servers for the planned NLB configuration.
Solution: You configure the network cards to be on the same subnet and to have static IP addresses. You configure the
cluster to use unicast.
Does this meet the goal?
A. Yes
B. No
Correct Answer: A
References: https://technet.microsoft.com/en-us/windows-server-docs/networking/technologies/network-load-balancing
QUESTION 27
You have a network that contains several servers that run Windows Server 2016.
You need to use Desired State Configuration (DSC) to configure the servers to meet the following requirements:
-Install the Web Server server role.
-Start the World Wide Web Publishing service.
How should you configure the DSC resources? To answer, drag the appropriate values to the correct locations. Each
value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to
view
content.
Select and Place:
QUESTION 28
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while
others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
Your network contains an Active Directory domain. The domain contains a new file server named Server1 that runs a
Server Core installation of Windows Server 2016.
Server l has an ReFS-formatted volume D: and an NTFS-formatted volume E:. the- volumes do not contain any data.
You Install the Data Deduplication role service on Server l.
You need to implement Data Deduplicalion for volumes on Di and E:.
Solution; From Windows PowerShell. you run Format-Volume D: -FlleSystem NTFS and Enable-DeDupVolume-Volume
D:,E:.
Does this meet the goal?
A. Yes
B. No
Correct Answer: A
QUESTION 29
Your network contains an Active Directory forest The forest contains one domain named contoso.com. The domain
contains two domain controllers named DC1 and DC2. DC1 holds all of the operations master roles.
During normal network operations, you run the following commands on DC2:
Move-ADDirectoryServerOperationMasterRole -Identity “DC2” -OperationMasterRole PDCEmulator.
Move-ADDirectoryServerOperationMasterRole -Identity “DC2” -OperationMasterRole\\’RIDMaster DC1 fails.
You remove DC1 from the network, and then you run the following command:
Move-ADDirectoryServerOperationMasterRole -Identity “DC2” -OperationMasterRole SchemaMaster.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
Hot Area:
QUESTION 30
For Windows Server 2016, Nano Server is distributed on the physical media, where you will find a NanoServer folder;
this contains a .wim image and a subfolder called Packages. It is these package files that you use to add server roles
and features to the VHD image, which you then boot to.
Assume that several variables have been configured already, which PowerShell command would you use to create a
Nano Server which had the Hyper-V role, clustering, OEM Drivers and antimalware?
A. New-NanoServerImage -MediaPath $mediapath -BasePath $basepath -TargetPath $targetpath -ComputerName
$computername -OEMDrivers -Clustering – Defender -Compute
B. New-NanoServerImage -MediaPath $mediapath -BasePath $basepath -TargetPath $targetpath -ComputerName
$computername -OEMDrivers -Clustering – Storage -EnableRemoteManagementPort
C. New-NanoServerImage -MediaPath $mediapath -BasePath $basepath -TargetPath $targetpath -ComputerName
$computername -OEMDrivers -Defender – Containers -EnableRemoteManagementPort
D. New-NanoServerImage -MediaPath $mediapath -BasePath $basepath -TargetPath $targetpath -ComputerName
$computername -Defender -Storage – Compute – EnableRemoteManagementPort
Correct Answer: A
QUESTION 31
Active Directory Recycle Bin is enabled. You discover that a support technician accidentally removed 100 users from an
Active Directory group named Group1 an hour ago. You need to restore the membership of Group1. What should you
do?
A. Perform tombstone reanimation.
B. Export and import data by using Dsamain.
70-740 PDF Dumps | 70-740 Practice Test | 70-740 Study Guide 22 / 30https://www.leads4pass.com/70-740.html
2019 Latest leads4pass 70-740 PDF and VCE dumps Download
C. Perform a non-authoritative restore.
D. Recover the items by using Active Directory Recycle Bin.
Correct Answer: B
A group has been modified. Nothing has been deleted. Therefore, answers A and D will not work. Answer C would work
if it was an authoritative restore, but not a non-authoritative restore. The solution is to recover an earlier copy of the
group from a backup or active directory snapshot by using DSadmain.
QUESTION 32
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while
others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
You have two servers that run Windows Server 2016.
You plan to create a Network Load Balancing (NLB) cluster that will contain both servers.
You need to configure the network cards on the servers for the planned NLB configuration. Solution: You configure the
network cards to be on the same subnet and to have static IP addresses. You configure the cluster to use multicast.
Does this meet the goal?
A. Yes
B. No
Correct Answer: A
References: https://technet.microsoft.com/en-us/windows-server-docs/networking/technologies/network-load-balancing
QUESTION 33
You create a Storage Spaces Direct hyper-converged failover cluster. The duster contains three nodes and a 1-TB
Storage Spaces Direct volume.
The cluster will store virtual machines.
You plan to extend the volume by adding an additional 3 TB. What is the minimum amount of extra disk capacity
required to accommodate extending the volume?
A. 3TB on the coordinator node
B. 3 TB per node
C. 4 TB per node
D. 4 TB on the coordinator node
Correct Answer: B
References: https://docs.microsoft.com/en-us/windows-server/storage/storage-spaces/drive-symmetry-considerations
QUESTION 34
Your network contains two Hyper-V servers named Server1 and Server2. Server1 has Windows Server 2012 R2
installed. Server2 has Windows Server 2016 installed.
You perform a live migration of a virtual machine named VM1 from Server1 to Server2.
You need to create a production checkpoint for VM1 on Server2.
Which three Windows PowerShell cmdlets should you run in sequence? To answer, move the appropriate Windows
PowerShell cmdlets from the list of actions to the answer area and arrange them in the correct order.
Select and Place:
QUESTION 35
You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 hosts a virtual machine named VM1.
VM1 is in a workgroup. VM1 is currently in a running state.
You need to create 10 copies of VM1 on Server1 in the least amount of time possible.
Which cmdlets should you use?
A. Stop-VM, and then Import-VM
B. Export-VM, and then Import-VM
C. Checkpoint-VM, and then New-VM
D. Copy-VMFile, and then New-VM
Correct Answer: B
QUESTION 36
You deploy a new Hyper-V host named Server1 that runs Windows Server 2016.
You implement receive side scaling (RSS) on Server1. The chipset on Server1 does not support NetDMA.
All of the equipment on your network supports 10-Gbps connectivity.
On Server1, you deploy a virtual machine named VM1. You configure VM1 to aggregate all of the Windows and non-
Windows tog files for all of the servers on the network. VM1 has four virtual processors.
You discover that VM1 drops packets.
QUESTION 37
You create a Nano server image named Nano1.vhdx by using the New-NanoServerImage cmdlet.
You attach Nano1.vhdx to a Generation 1 virtual machine named Nano1.
When you start Nano1, you get the following error message: “Boot failure. Reboot and select proper Boot device or
Insert Boot Media in selected Boot device”
You need to successfully start Nano server.
What should you do?
A. Attach Nano1.vhdx to a SCSIcontroller.
B. Recreate Nano1 as a Generation 2 virtual machine.
C. Increase the memory of Nano1 to 512 Mb.
D. Modify the BIOS settings of Nano1.
Correct Answer: B
A Generation 1 VM cannot boot from a vhdx disk; only a Generation 2 VM can boot from an vhdx disk.
QUESTION 38
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is
repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is
exactly the same in each question in this series.
Your network contains an Active Directory domain named contoso.com. The functional level of the forest and the
domain is Windows Server 2008 R2. All servers in the domain.
Run Windows Server 2016 Standard. The domain contains 300 client computers that run either Windows 8.1 or
Windows 10.
The domain contains nine servers that are configured as shown in the following table.
The virtual machines are configured as follows:
-Each virtual machine has one virtual network adapter.
–
VM1 and VM2 are part of a Network Load Balancing (NLB) cluster.
–
All of the servers on the network can communicate with all of the virtual machines.
You need to install the correct edition of Windows Server 2016 to support the planned changes for Server2, Server3,
Server4, and Server5.
Which edition or editions should you choose for each server? To answer, drag the appropriate editions to the correct
servers. Each edition may be used once, more than
once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Select and Place: 
QUESTION 39
Note: This question is part of a series of questions that use the same similar answer choices An answer choice may be
correct for more than one question in the series Each question is independent of the other questions in this series.
Information and details provided in a question apply only to that question You have a Hyper-V host named Server1 that
runs Windows Server 2016 and a two-node scale-out file server cluster named Cluster1 A virtual machine named VM1
runs on Server1 You need to migrate the storage on VM1 to Cluster1 Which tool should you use?
A. the clussvc.exe command
B. the cluster.exe command
C. the Computer Management console
D. the configurehyperv.exe command
E. the Disk Management console
F. the Failover Cluster Manager console
G. the Hyper-V Manager console
H. the Server Manager Desktop app
Correct Answer: G
QUESTION 40
You have a server named Server1 that runs Windows Server 2016 Server1 is a Hyper-V host.
You have two network adapter cards on Server1 that are Remote Direct Memory Access (RDMA) -capable.
You need to aggregate the bandwidth of the network adapter cards for a virtual machine on Server1.
The solution must ensure that the virtual machine can use the RDMA capabilities of the network adapter cards.
Which command should you run first? To answer, select the appropriate options in the answer area.
Hot Area:
Share 40 of the latest and effective 70-740 exam dumps and Practice test questions for free, 100% real and effective exam questions and answers! Get the full 70-740 dumps:https://www.leads4pass.com/70-740.html
(Total questions:291 Q&A)
[PDF] Free Microsoft MCSA 70-740 pdf dumps download from Google Drive: https://drive.google.com/open?id=1arUK9hrLmbZkxEYME2usof649Rxndlfo
[PDF] Free Full Microsoft pdf dumps download from Google Drive: https://drive.google.com/open?id=1AwBFPqkvdpJBfxdZ3nGjtkHQZYdBsRVz
leads4pass Promo Code 12% Off
related: https://www.certificatedumps.com/hot-microsoft-database-98-364-dumps/